LKW7450.008 18.9L Zenith Waterborne Undercoat-White $/L
Sold by the Litre. Order 4L(gallon) or 19L(Pail)
LKW7450 GENERAL INFORMATION
Axalta’s Waterborne White Topcoat is a high performance pigmented waterborne coating designed for finishing fine woodwork
where an opaque finish is desired. It has excellent hiding power and provides a beautiful and smooth, solid color finish. This product
is designed to be used self-seal one product application. This product passes all KCMA (Kitchen Cabinet Manufacturers Association)
performance tests when applied and cured properly. Waterborne White Topcoat is designed for Professional use only.
1. PRODUCTS
• LKW1458 - 25 sheen
2. MIXING RATIO
• All products should be stirred well before use and, for best
results, continuously agitated while in use.
• Catalyzation: For best results 2% CXC7500 catalyst
3. SHELF LIFE @ 77°F (25°C)
• 18 months from manufacturing date
4. CLEAN UP
• Keep container closed when not in use to avoid skinning. Do
not transfer contents to other containers for storage or
disposal. In case of spillage, absorb with inert material
such as sand or kitty litter. Dispose of empty cans or
unused portion in accordance with local regulations.
5. ADDITIVES
• Add YXC0384 1-2% max to extend dry time. See
Additional Notes for details.
6. SURFACE PREPARATION
• Surface must be clean and dust free with a moisture
content of 6-8% prior to finishing. Remove all dust,
dirt, wax and wood marks. Proper sanding and
preparation of the wood is critical to achieving
consistent results.
• On new wood, finish sand surface with 150-180 grit
sandpaper
• On previously finished wood, remove all old paint or
varnish and follow new wood procedure.
7. COMPANION PRODUCTS
• Self seal, or LKW7450 Zenith White Basecoat
8. TECH NOTES
• If reduction needed, add water as needed.
9. SUBSTRATES
• Commonly used furniture and cabinetry woods
• MDF/HDF
NOTE: Not to be used on exterior applications
10. APPLICATION
• See Application Notes for additional details.
11. FLASH / DRY TIMES
AIR DRY @ 77°F (25°C)
12. FORCE DRY
Flash 8 – 12 Minutes
Bake 15-20 Minutes @ 130°F
Cool Down 20 Minutes ambient
Stack Overnight
13. GUN SET UP
Gravity Feed 1.6 mm - 1.8 mm
Siphon Feed 1.8 mm – 2.0 mm
Airless 10 – 15 thousandths
Air-Assisted Airless 11 – 15 thousandths
AIR PRESSURES
Gravity Feed 30-35 psi (2.0-2.4 bar)
Siphon Feed 35-40 psi (2.4-2.8 bar)
Air-Assisted Airless 10-20 psi (0.7-1.4 bar)
See spray gun manufacturer data for more information
14. PHYSICAL DATA
Viscosity
20-25 Sec EZ Zahn #2 @
77˚F
Weight Solids % 50.38%
Volume Solids % 39.76%
Actual VOC 0.84 #/gal
VOC Ratio (lb.voc/lb.solids) 0.84lbs/gal of Product
Regulatory VOC
(less water and exempt solvents) 198.16 g/l
Weight Per Gallon 9.95 lbs/gal
Flash Point 201ºF Closed Cup
Theoretical Coverage 637.81 ft/gal @ 1 mil dry
VHAP (lb.HAP/lb.solids) 0.04lb VHAP/lb solid
Coating Category White
Dry to touch 25-30 Minutes
Flash between coats 45-60 Minutes
To Stack 24 Hours