Skip to content

Hardware

Filters

  • 18 Gauge Brad Nail - Various Sizes

    CFPS 2017
    $0.79 - $2.16
    $0.79 - $2.16
    $0.79 - $2.16
    $0.79
    In stock

    Order by the thousand in multiples of 5. For Example , if you want  15,000 nails (3boxes) order as 15 Galvanized 18g brad nails. Packaged 5000 per ...

    View full details
    $0.79 - $2.16
    $0.79 - $2.16
    $0.79 - $2.16
    $0.79

  • 145301 Bisco P-14 w/ 80 pieces

    LAMELLO
    $49.16 - $49.16
    $49.16
    $49.16 - $49.16
    $49.16
    In stock

    Bisco P-14 Aligning Element (80 pair) - No. 145301. Bisco P-14 is a 7 mm thick plastic element that is part of the Clamex P system The aligning el...

    View full details
    $49.16 - $49.16
    $49.16
    $49.16 - $49.16
    $49.16

  • 251066 Position Pins D8mm for combination w/ CNC Zeta, Top21, Classic X

    LAMELLO
    $27.46 - $27.46
    $27.46
    $27.46 - $27.46
    $27.46
    In stock

    Positioning Pins for Zeta P2 For positioning in holes with a diameter of Ø 8 mm

    $27.46 - $27.46
    $27.46
    $27.46 - $27.46
    $27.46

  • 186375 Cabineo Insert Nut M6 100 pieces plus 1 Install Tool

    LAMELLO
    $86.27 - $86.27
    $86.27
    $86.27 - $86.27
    $86.27
    In stock

    Cabineo 8 M6 is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The connector is ...

    View full details
    $86.27 - $86.27
    $86.27
    $86.27 - $86.27
    $86.27

  • 145550 Divario P-18 80 pairs

    LAMELLO
    $138.36 - $138.36
    $138.36
    $138.36 - $138.36
    $138.36
    In stock

    With the Divario shelves or separation walls can be inserted into pre assembled structures. Additionally, the Divario P 18 also clamps the componen...

    View full details
    $138.36 - $138.36
    $138.36
    $138.36 - $138.36
    $138.36

  • 145373 Clamex P-10 Flexus w/ 300 pairs

    LAMELLO
    $689.52 - $689.52
    $689.52
    $689.52 - $689.52
    $689.52
    In stock

    Clamex P-10 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, ...

    View full details
    $689.52 - $689.52
    $689.52
    $689.52 - $689.52
    $689.52

  • 145339B Clamex P-14 Half w/o Lever bx 2000pcs

    LAMELLO
    $1,096.26 - $1,096.26
    $1,096.26
    $1,096.26 - $1,096.26
    $1,096.26
    In stock

    Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 5 mm access hole, ...

    View full details
    $1,096.26 - $1,096.26
    $1,096.26
    $1,096.26 - $1,096.26
    $1,096.26

  • 145312 P System Connector Assortment Professional

    LAMELLO
    $1,113.38 - $1,113.38
    $1,113.38
    $1,113.38 - $1,113.38
    $1,113.38
    In stock

    P-System connector assortment professional Assortment contains • 90 pairs Clamex P-14 • 30 pairs Clamex P-14/10 Flexus • 30 pairs Clamex P-14/10...

    View full details
    $1,113.38 - $1,113.38
    $1,113.38
    $1,113.38 - $1,113.38
    $1,113.38

  • 132143 P system Grove Cutter Diamond CNC 100 4x7x40mm Z3 NLA 4/4.6/52mm

    LAMELLO
    $431.42 - $431.42
    $431.42
    $431.42 - $431.42
    $431.42
    In stock

    P-System cutter DP 100.4 x 7 x 40 mm, 4 / 5.5 / DTK 52 mm, Z3 The P-System connecting fittings can be installed either with the Zeta P2 power to...

    View full details
    $431.42 - $431.42
    $431.42
    $431.42 - $431.42
    $431.42

  • 131556 6mm CNC Drill for Clamex P 35x10x100

    LAMELLO
    $131.43 - $131.43
    $131.43
    $131.43 - $131.43
    $131.43
    In stock

    P-System CNC drill 6 mm, L=100 mm The P-System connecting fittings can be installed either with the Zeta P2 power tool or using a CNC machine...

    View full details
    $131.43 - $131.43
    $131.43
    $131.43 - $131.43
    $131.43

  • 131342 P System Shaft Cutter Carbide for CNC 9.8/7x23 shaft 12/length 80

    LAMELLO
    $393.74 - $393.74
    $393.74
    $393.74 - $393.74
    $393.74
    In stock

    P-System CNC shaft tool cutter, solid carbide, shaft ø 12x40, L=80 mm The P-System connecting fittings can be installed either with the Zeta ...

    View full details
    $393.74 - $393.74
    $393.74
    $393.74 - $393.74
    $393.74

  • 6012300 Invis Mx2 joiner set w/ 14mm Stud Set w/ 20 pieces

    LAMELLO
    $208.66 - $208.66
    $208.66
    $208.66 - $208.66
    $208.66
    In stock

    Invis Mx2 is a unique, magnet-driven connection for the highest demands on aesthetics, stability and productivity. With no visible openings, Invis ...

    View full details
    $208.66 - $208.66
    $208.66
    $208.66 - $208.66
    $208.66

  • 251067 Positioning Clip for Zeta P2, CNC Application

    LAMELLO
    $19.09 - $19.09
    $19.09
    $19.09 - $19.09
    $19.09
    In stock

    Lamello 251067 - Positioning clip for Zeta P2, CNC application The Zeta P2 is the profile biscuit joiner for P-System anchorage, and the Clamex P ...

    View full details
    $19.09 - $19.09
    $19.09
    $19.09 - $19.09
    $19.09

  • 186376 Cabineo Insert Nut M6 500 pieces plus 1 Install Tool

    LAMELLO
    $336.40 - $336.40
    $336.40
    $336.40 - $336.40
    $336.40
    In stock

    Cabineo 8 M6 is a one-piece cabinet connector which can be used with all CNC machines because only surface machining is required. The connector is ...

    View full details
    $336.40 - $336.40
    $336.40
    $336.40 - $336.40
    $336.40

  • 145560 Lamello Divario P-18 bx w/ 300 pairs

    LAMELLO
    $481.74 - $481.74
    $481.74
    $481.74 - $481.74
    $481.74
    In stock

    Divario P-18 is a detachable connector for slide-in insertion and is anchored in the form-locking P-System groove within seconds. The connector is ...

    View full details
    $481.74 - $481.74
    $481.74
    $481.74 - $481.74
    $481.74

  • 145370 Clamex P medius 14/10, centre panel connector Box with 80 pairs

    LAMELLO
    $197.45 - $197.45
    $197.45
    $197.45 - $197.45
    $197.45
    In stock

    Clamex P-14/10 Medius is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm acc...

    View full details
    $197.45 - $197.45
    $197.45
    $197.45 - $197.45
    $197.45

  • 145356 Clamex P-14 bx 1000prs

    LAMELLO
    $2,203.61 - $2,203.61
    $2,203.61
    $2,203.61 - $2,203.61
    $2,203.61
    In stock

    Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, ...

    View full details
    $2,203.61 - $2,203.61
    $2,203.61
    $2,203.61 - $2,203.61
    $2,203.61

  • 145346 Clamex P-14 bx w/ 300prs

    LAMELLO
    $682.55 - $682.55
    $682.55
    $682.55 - $682.55
    $682.55
    In stock

    Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, ...

    View full details
    $682.55 - $682.55
    $682.55
    $682.55 - $682.55
    $682.55

  • 145314 P System Connector Assortment Basic

    LAMELLO
    $556.69 - $556.69
    $556.69
    $556.69 - $556.69
    $556.69
    In stock

    P-System connector assortment basic Assortment contains • 80 pairs Clamex P-14 • 80 pairs Tenso P-14 incl. clip • 60 pairs Clamex P-14/10 Medius...

    View full details
    $556.69 - $556.69
    $556.69
    $556.69 - $556.69
    $556.69

  • 145338B Clamex P-14 Half w/ Lever bx 2000pcs

    LAMELLO
    $1,667.78 - $1,667.78
    $1,667.78
    $1,667.78 - $1,667.78
    $1,667.78
    In stock

    Clamex P-14 is a detachable connector and is anchored in the form-locking P-System groove within seconds. Through the minimalist 6 mm access hole, ...

    View full details
    $1,667.78 - $1,667.78
    $1,667.78
    $1,667.78 - $1,667.78
    $1,667.78

  • 132154 - Cutter arbor for P-System groove cutter,CNC, clamp. surface 2°, S16x50mm,d=30, L

    LAMELLO
    $609.07 - $609.07
    $609.07
    $609.07 - $609.07
    $609.07
    In stock

    Cutter arbor 30 mm, DTK 48 mm, S 16 x 50, L = 85 mm "Weldon" The P-System connecting fittings can be installed either with the Zeta P2 power tool...

    View full details
    $609.07 - $609.07
    $609.07
    $609.07 - $609.07
    $609.07

  • 145303 Bisco P14 bx 1000 pc

    LAMELLO
    $464.14 - $464.14
    $464.14
    $464.14 - $464.14
    $464.14
    In stock

    Bisco P is a plastic biscuit which fits into the 7 mm P-System groove and is held in the groove due to its surface structure. Bisco P is used in co...

    View full details
    $464.14 - $464.14
    $464.14
    $464.14 - $464.14
    $464.14

  • 132151 Cutter Arbour P system Groove Cutter CNC 25x90mm DTK 48mm

    LAMELLO
    $378.96 - $378.96
    $378.96
    $378.96 - $378.96
    $378.96
    In stock

    Cutter arbor 30 mm, DTK 48 mm, S 25 x 60, L = 102 mm The P-System connecting fittings can be installed either with the Zeta P2 power tool or usi...

    View full details
    $378.96 - $378.96
    $378.96
    $378.96 - $378.96
    $378.96

  • 132150 Cutter Arbour P system Groove Cutter CNC 20x50mm DTK 48mm

    LAMELLO
    $378.96 - $378.96
    $378.96
    $378.96 - $378.96
    $378.96
    In stock

    Cutter arbor 30 mm, DTK 48 mm, S 20 x 50, L = 102 mm The P-System connecting fittings can be installed either with the Zeta P2 power tool or usi...

    View full details
    $378.96 - $378.96
    $378.96
    $378.96 - $378.96
    $378.96