Skip to content

AUS0846 Low sheen sealer/Topcoat Dead flat 18.9L $/L

Original price $22.84 - Original price $22.84
Original price
$22.84
$22.84 - $22.84
Current price $22.84

Sold by the Litre.  Order by the gallon(4L) or by the Pail(19L)

AUS0846 Axalta’s Ultraguard™ Conversion Varnish Sealer/Topcoat is a premium quality, post-catalyzed, alkyd-amino sealer/topcoat,
formulated to offer exceptional durability and physical properties. As a sealer it dries fast, has excellent holdout, and sands easy. As
a topcoat it provides a consistent dead flat appearance. It is supplied ready to spray (after catalyzation) and needs no further
reduction. This product is designed for Professional use only. For wood substrates only.
1. PRODUCTS • AUS0846
2. MIXING RATIO   5% 399-5003 by volume

3. SHELF LIFE @ 77°F (25°C) • 18 months as packaged
4. CLEAN UP • Dispose of dirty solvent and cleaning rags in a safe and
compliant manner. Solvent or lacquer soaked rags should
be stored in water-filled, closed containers prior to disposal.
5. Mixing
Stir thoroughly, do not shake
6. SURFACEPREPARATION
• Surface must be clean and dust free with a moisture
content of 6-8% prior to finishing. Remove all dust,
dirt, wax and wood marks. Proper sanding and
preparation of the wood is critical to achieving
consistent results.
• On new wood, finish sand surface with 150-180 grit
sandpaper
• On previously finished wood, remove all old paint or
varnish and follow new wood procedure.
7. COMPANION PRODUCTS •AUS5500 NVS3100
VUC1000 VUW2000
•Graintone Plus™ stain system
8. TECH NOTES • No thinning is recommended.
9. SUBSTRATES • Commonly used furniture and cabinetry woods
• MDF/HDF
NOTE: Not to be used on exterior applications
10. APPLICATION
11. FLASH / DRY TIMES
AIR DRY @ 77°F (25°C)
12. FORCE DRY
Flash 8 – 10 Minutes
Bake 15 Minutes @ 140°F
Cool Down 10 Minutes ambient
Stack After cool down
13. GUN SET UP
Gravity Feed 1.4 mm - 1.8 mm
Siphon Feed 1.4 mm - 1.8 mms
Airless 10 – 15 thousandths
Air-Assisted Airless 11 – 15 thousandths
AIR PRESSURES
Gravity Feed 30-35 psi (2.0-2.4 bar)
Siphon Feed 35-40 psi (2.4-2.8 bar)
Air-Assisted Airless 5-10 psi (0.3-0.7 bar)
See spray gun manufacturer data for more information
14. PHYSICAL DATA
Viscosity 19-23" @77F #2 EZ ZAHN
Weight Solids % 31.28%
Volume Solids % 23.48%
Actual VOC 3.83 lbs/gal of Product
VOC Ratio (lb.voc/lb.solids) 1.70 (lb VOC/lb solid)
Regulatory VOC
(less water and exempt solvents) 590 g/l
Weight Per Gallon 7.69 lbs/gal
Flash Point 0ºF Closed Cup
Theoretical Coverage 376.62 ft/gal @ 1 mil dry
VHAP (lb.HAP/lb.solids) .30 lb VHAP/lb solid
Photochemically Reactive No
Coating Category Clear
• See application notes for detailed instructions