AUF7000 Neutral Ultraguad Primer 17L/pail $/L
Sold by the Litre. Order by the gallon(4L) or by the Pail(17L)
AUF7000 Axalta’s Ultraguard™ Neutral Conversion Varnish Primer is a premium quality neutral post-catalyzed varnish basecoat formulated to offer superior durability and the ability to create dark rich opaque colors. It is recommended for use under Axalta’s Ultraguard
Neutral Conversion Varnish Topcoats. This product has the added benefit of being low in formaldehyde.
1. PRODUCTS
• AUF7000
2. MIXING RATIO
• All products should be stirred well before use and, for best
results, continuously agitated while in use.
• Catalyzation: 3% 399-5003 by volume only
• Reduction: 20-30% by vol. YYT1090 or 390-
7001 thinners
3. SHELF LIFE @ 77°F (25°C)
• 18 months from manufacturing date
4. CLEAN UP
• Dispose of dirty solvent and cleaning rags in a safe and
compliant manner. Solvent or lacquer soaked rags should
be stored in water-filled, closed containers prior to disposal.
5. ADDITIVES
• In the event of blushing or blistering, add Axalta 390-9303
Lacquer Retarder to extend dry time. See Additional Notes
portion of this document for details.
6. SURFACE PREPARATION
• Surface must be clean and dust free with a moisture
content of 6-8% prior to finishing. Remove all dust,
dirt, wax and wood marks. Proper sanding and
preparation of the wood is critical to achieving
consistent results.
• On new wood, finish sand surface with 150-180 grit
sandpaper
• On previously finished wood, remove all old paint or
varnish and follow new wood procedure.
7. COMPANION PRODUCTS
• AUF720x Ultraguard Neutral CV Topcoat
8. TECH NOTES
• Reduction is necessary, use Axalta YYT7169 Catalyzed
system reducer or other approved thinner. See Additional
Notes portion of this document for details.
9. SUBSTRATES
• Commonly used furniture and cabinetry woods
• MDF/HDF
NOTE: Not to be used on exterior applications
10. APPLICATION
• See Application Noes for additional details.
11. FLASH / DRY TIMES
AIR DRY @ 77°F (25°C)
12. FORCE DRY
Flash 15 Minutes
Bake 20 Minutes @ 140°F
Cool Down 15 Minutes ambient
Stack After cool down
13. GUN SET UP
Gravity Feed 1.6 mm - 1.8 mm
Siphon Feed 1.8 mm – 2.0 mm
Airless 10 – 15 thousandths
Air-Assisted Airless 11 – 15 thousandths
AIR PRESSURES
Gravity Feed 30-35 psi (2.0-2.4 bar)
Siphon Feed 35-40 psi (2.4-2.8 bar)
Air-Assisted Airless 10-20 psi (0.7-1.4 bar)
See spray gun manufacturer data for more information
14. PHYSICAL DATA
Viscosity
67-72 KU at 25°C (~77°F)
Weight Solids % 55.9% +/- 2
Volume Solids % 41.34% +/- 2
Actual VOC 4.22lbs/gal of Product
VOC Ratio (lb.voc/lb.solids) 0.8lb VOC/lb solid
Regulatory VOC
(less water and exempt solvents) 502.37 g/l VOC
Weight Per Gallon 9.58lbs/gal+/- 2
Flash Point 18°C
Theoretical Coverage 525 ft/gal @ 1 mil dry
VHAP (lb.HAP/lb.solids) 0.348lb VHAP/lb solid
Coating Category Neutral
Dry to touch 30 - 35 Minutes
Flash between coats 40 - 45 Minutes
To Stack 12 - 24 Hours